Menu

colfax plumber

Clogged Whole House Filter

, , , , , , , , 0

 

Is a Clogged Whole House Filter Causing Your Low Water Pressure?

If you’ve noticed a sudden drop in water pressure throughout your home, a clogged whole house water filter may be the reason. Many homeowners assume low pressure means a major plumbing issue, but sometimes the solution is as simple as replacing a dirty filter.

What Does a Whole House Filter Do?

A whole house water filter is designed to remove sediment, dirt, and other contaminants before water enters your home’s plumbing system. This helps protect faucets, appliances, water heaters, and plumbing fixtures from buildup and damage.

Signs Your Filter May Be Clogged

  • Low water pressure throughout the entire house
  • Reduced flow at multiple faucets and showers
  • Water pressure gradually getting worse over time
  • Dirty or discolored filter cartridges
  • Appliances taking longer to fill with water

Why It Matters

As sediment builds up inside the filter, water has a harder time passing through. This restriction can affect every fixture in your home and put additional strain on your plumbing system.

The Solution

Regular filter inspections and replacements can help maintain strong water pressure and extend the life of your plumbing fixtures and appliances. Most filters should be checked according to the manufacturer’s recommendations and local water conditions.

We’re Here to Help

If you’re experiencing low water pressure and aren’t sure what’s causing it, Craig Johnson Plumbing can help diagnose the issue and get your water flowing properly again.

Sometimes the fix is simple—a clogged filter. Don’t overlook one of the most common causes of low water pressure! 💧🔧

Craig Johnson Plumbing – Serving Nevada and Placer Counties with honest, reliable service

, , , , , , , ,

From Diagnosis to Repair: What Happens During a Plumbing Service Call?

When plumbing problems strike, it can be hard to know what’s happening behind the scenes. At Craig Johnson Plumbing, we believe in keeping our customers informed every step of the way.

Here’s a look at what a typical plumbing repair process looks like from start to finish.

1. The Initial Problem

Most service calls begin with a symptom rather than a clear diagnosis. It could be:

• A slow-draining sink
• A backed-up toilet
• Sewer odors around the property
• Water pooling in the yard
• Frequent drain clogs

What seems like a simple clog can sometimes be a much larger issue hidden underground.

2. Investigation and Diagnosis

The first step is finding the source of the problem. We use professional diagnostic tools, including sewer cameras, leak detection equipment, and pressure testing when needed.

For sewer issues, a camera inspection allows us to see inside the pipe and identify:

• Cracked sewer lines
• Root intrusion
• Pipe separations
• Collapsed sections
• Heavy buildup and blockages

A proper diagnosis ensures the repair addresses the actual problem, not just the symptoms.

3. Creating a Repair Plan

Once the issue is identified, we discuss the findings with the homeowner and recommend the best solution.

Our goal is always to provide:

• Clear communication
• Honest recommendations
• Upfront pricing
• Long-lasting repairs
4. The Repair Process

Depending on the issue, repairs may involve:

• Replacing damaged sewer pipe
• Repairing water lines
• Installing new fixtures
• Clearing blockages
• Excavation and pipe replacement

In the case of a broken sewer line, excavation may be necessary to remove the damaged section and install new piping that meets current standards.

5. Testing the System

After repairs are completed, we thoroughly test the system to ensure everything is functioning properly.

This may include:

• Running water through fixtures
• Checking for leaks
• Performing another camera inspection
• Verifying proper drainage and flow

We don’t consider the job complete until the system is working as intended.

6. Cleanup and Final Walkthrough

A professional plumbing repair should leave your property in good condition. After the work is finished, we clean up the job site and walk the customer through the completed repair.

You’ll know exactly what was fixed and have confidence that the problem has been resolved.

When Plumbing Problems Happen, We’re Here to Help

Whether it’s a simple repair or a major sewer line replacement, Craig Johnson Plumbing has the experience and equipment to diagnose the problem correctly and get it fixed right.

From diagnosis to repair, we’re committed to providing honest service, quality workmanship, and plumbing solutions you can trust.